RadioMaster TX16 Mark II radio controller, ELRS, EdgeTX support, OpenTX

RadioMaster TX16 Mark II radio controller (mode 2)

Features

Better internal circuitry and optimized power supply.

New charging circuit with built-in reverse polarity protection.

The optimized charging IC now allows up to 2.2A internal charging current.

Rear-mounted audio jack provided headphone output.

Gimbal V4.0 has improved centering and temperature stability (same circuit as AG01).

Optional high/low rear grips are included to improve ergonomics.

Improved S1/S2 buttons with clear center detents.

Improved LS/RS sliders with smoother feel and better center retention.

Redesigned battery cover for better access.

Retooled body shell with improved fit and finish.

Trainer socket changed to standard 3.5mm TRS socket.

Added rear DIY socket for custom mods.

Improved internal plastics for better longevity.

Available ELRS and 4in1 versions.

EdgeTX and OpenTX support

EdgeTX is installed by default (Touchscreen enabled).

* Requires EdgeTX version 2.6.0 or OpenTX version 2.3.15 or later.

Available in 4in1 and ELRS versions

“If you can’t decide between ELRS and 4in1, I would probably go for the ELRS version. It’s going to be the main RC protocol in the near future as it’s so powerful and affordable, with a wide range of small and cheap ELRS receivers available.

One reason to get the 4in1 is if you just want to use other protocols like Frsky D8/D16, but these are obsolete and are slowly being phased out. Or if you are buying an external ELRS module for the radio, then it also makes sense to get the 4in1, as you don't want to have another ELRS module on board doing nothing. An external ELRS module can have the advantage of higher max output power of up to 1W. But honestly 250mW from the internal module is enough for FPV pilots, giving you miles of range in ideal conditions."

FCC Version and EU LBT Version are available

Currently, we provide FCC standard version and EU LBT version. Please check the supported protocols below.

FCC Standard Version

4in1 (FCC) Version supports all MPM protocols

ELRS (FCC) is pre-installed with ExpressLRS ISM FW (max power depends on hardware)

EU LBT version

4in1 LBT (Europe) version is limited to LBT compatible protocols FrSKY X/X2 LBT, HoTT LBT and DSMX

ELRS LBT (Europe) version is pre-installed with LBT FW ExpressLRS CE EU domain (power output limited to 100mw)

Optional V4.0 Hall Gimbals and AG01 Gimbals

V4.0 HALL GIMBALS

Standard version with V4.0 Hall Gimbals, same chipset as AG01, optimized hall sensor circuit, improves center point positioning and temperature stability. Pole stroke, self-centering and pole tension are now externally adjustable.

AG01 GIMBALS

AG01 Gimbal is fully CNC milled for maximum precision with quad ball bearings for a smooth and precise feel. Featuring accessible front tension and stroke adjustment for easy fine tuning.

Flat & raised cuffs included

Both raised and flat versions of the rear grips are included, allowing you to customize the feel of your TX16s MKII right out of the box.

External Bay Module

The TX16s natively supports Team Black Sheep MicroTX modules in CRSFmode with LUA scripts. Best of all the TX16s internal 4-in-1 multi-protocol module allows you to keep the MicroTX installed and switch between internal RF and Crossfire via software, no more module swapping.

Updated project

Retooled faceplate with improved fit and finish

Improved S1/S2 buttons with center detents

4.3” IPS Color Display – The TX16s features a bright and clear 4.3-inch IPS color display for easy and convenient model setup and operation with adjustable brightness to suit all conditions.

Improved LS/RS sliders with smoother feel and better center retention.

New 3.5mm Audio jack - Rear mounted audio jack minimizes RF interference from external modules and adds headphone audio capability.

Redesigned battery cover, easier to remove.

DIY rear socket added for custom mods.

We also produce and sell many kinds of electronic products. We haven't published most of them online yet. So if you need anything, you can contact me.

Feedback

We will really appreciate your early confirmation when placing order. Since your feedback is very important to our business development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. It will just take you 1 minute,but this 1 minute has the extremely vital significance to us. Please contact us before leaving negative or neutral feedback. We will work with you to solve any problem. Thank you for your understanding!